2440 Hancock Expwy. Colorado Springs, CO. 80910

719-219-1926 info@toxicchoppers.com

Parts

parts_speedline_cap Speedline Gas Cap

Looking for something a little different….and functional? Check out our “Speedline” gas caps. These scream vintage racer styling! Constructed of 100% stainless steel, these caps will last a lifetime. Beautiful, satin finish won’t rust, corrode, or stain. And, they’re made in the U.S.A! Sealed by a fuel resistant, “Buna N”, rubber gasket, you can be sure this unit will never leak. Weld on bung can be installed on any steel tank. All parts are replaceable, so if you ever lose or damage a part of this cap, you can replace just that part without buying an entirely new assembly. These can also be used as oil caps on your custom oil tank. Offered in a 1.5 inch or 2 inch bung. Want something with a little more flash? We can show polish this assembly for an additional $30.00. Please allow 4-6 days for polishing.


Narrowglide Headlight Kit 
Our answer to the ugly, factory visor. This kit is entirely bolt-on and includes the headlight assembly, our “retro” bracket kit, and stainless steel hardware.  Custom etched headlight lenses available upon request.  $169.00 raw finish
$179.00 black powder coat
Also available in chrome for $199.00, with a 3 week lead time.

springerSpringer Forks

Fully CNC machined triple trees and rocker forks.  4130 Cromoly legs for superior strength.  Fully fixture Tig welded for accuracy.  Custom built to any length with your choice of rocker lengths for proper trail measurements and built for single, dual, or no disc brake.Available in raw, powder coated, or chrome finishes.Prices starting at $1295.00.  Please call for exact quote.


 “Retro” Bars retro_bars
 Manufactured from 1″ steel tubing, precision, laster cut 3/16″ steel gussets and Tig welded in a fixture.  Available in reses from 4.5 inches to 20 inches tall and widths for standard Harley risers, springers, and bagger applications.  Works with internal wiring and available with or without dimples.
Prices: $169.00-raw, no dimples.                                            $189.00 – black powder coat, no dimples.
              $179.00-raw with dimples.                                         $199.00 – black powder coat with dimples.
                                                                    Chrome available on request, add $95.00

“Retro” Sissy Bars
Bolt on Sissy Bar manufactured from 1/2 inch cold rolled steel, CNC machined, flush socket head screw mounts and precision laser cut gussets.  Currently available for 2004 and up Sportster…other models available on request.
$249.00 raw finish
$269.00 black powder coat
Chrome finish available on request, add $95.00

retro_air_cleaner“Retro” Air Cleaner
Retro styled air cleaner to fit CV carbs and fuel injected Sportsters.  Simple, bolt-on installation.
Priced at $159.00, black or chrome.

sportster_retro_kit

Sportster Retro Kit

Want something that sets your Sportster apart from all the others?  We’ve got just what you need.  Our Sportster Retro Kit includes our handlebars, our narrowglide headlight kit, and our curved, round sissy bar.  The complete kit is 100% “bolt on”.

Prices start at $549.00 for raw finish, and $579.00 for black powder coat.


chain_shift_rod

Chain Shift Rod

For those of you looking for the ultimate, industrial addition to your ride, we offer these rad shift links!

Available in any length, complete with rod ends.

Raw finish $89.00

Gloss black powder cost $99.00

Stainless Street $109.00


flatty_bars“Flatty” bars

Manufactured from 1″ steel tubing.

Precision mitered and Tig welded in a fixture.

$89.00 raw finish

$109.00 black powder coat

 


fuel_gaugeFuel Gauge

Not just stylish, but functional too.

This is a must have if you run a super sexy, slim, and tiny fuel tank or if you just like to go fast & far.

It will help keep you from being stranded by allowing you to keep tabs on your fuel level without having to stop, pop the cap, and look a gander inside.  The kit includes two precision machined, weld in bungs, two chrome elbows, and a section of fuel resistant tubing.  You even get to pick a color!  Not a very good welder?  Contact us about installation.

$35.00


ahang_handlebars

Handlebars

In addition to our production handlebars, we also offer custom “built to order” handlebars, for any application.

Available in 1 inch, 1.25 inch, or 1.5 inch diameters, with many custom bends.

Available with or without internal throttle and internal clutch/brake setup.

Finishes include raw, powder coated, or chrome.   Call or email for prices.


oil_capsCast Finned Oil Cap

Super cool speed fins help reduce oil temperature by 80 degrees and increase speed by 20 mph!  Not really, but the are uber-cool and guaranteed to be noticed!

Sand cast from 6061 aluminum, these caps feature a double, butyl, O-ring seal for a leak free fit.  Fits all Harley and aftermarket oil tanks that use the 1.25″ ID, push in style, filler neck.  They can also be used when fabricating custom oil tanks when using a section of 1.5″ X .120″ tubing for the filler neck (also available through Toxic Choppers).

Available in threaded version cast brass upon request.

$59.00


pulley_sprocket_spacers

Pulley & Sprocket Spacers

Our spacers are custom cut from 1/8 inch aluminum.

Allows fine tuning of pulley/sprockets and brake rotors.

No need to cut down 1/4 inch or thicker spacers or stack paper thin ones to get the size you need.

Fits all Harley hubs including 2000 and up applications.

$7.00 each.


shim_kit

Custom Builders Motor Shim Kit

If you are a custom builder or just building a bike for yourself, you need this kit.  It will allow you to shim your motor and transmission mounts upon final assembly and greatly reduce the chance of cracked cases or frames from improper alignment of the frame and motor/transmission mounts.

The kit includes 18 shims of varying thickness from .002 to .030 and instructions.  The shims are constructed of aluminum shim stock and are color coded for easy reference.  Replacement shims can be ordered in specific sizes.


rolling_chassisRolling Chassis

Please call for details & specifics.


Switch to mobile version